LPG Tanks for Defiscalised Systems

Tanks for Combustion Plants in Caltanissetta

LPG Tanks for Tax Plants

C.S.M. Lo Cascio S.r.l. produce a range of LPG storage tanks for combustion plants that have the capacities of 10 and 12.5 m. Each tank is certified in accordance with Directive 2014/68 / EU (Ex 97/23 / EC) and equipped with the necessary safety and control accessories.

Button
Button
Button
Button

Safety and Operating Accessories Assembled to the Tank

No. 01 OMECA safety valve mod. EU 30 complete with OMECA sub-valves mod. ST 32; (No. 02 in the above-ground version)
No. 01 Level indicator mod. 2074 Cotrako
No. 01 Liquid recovery valve VL 25
No. 01 OMECA filling valve mod. VRN 20L (model VRN 20 version F.T)
No. 01 GSE service group 35 (gaseous phase) with balancing valve, complete with connection with excess flow valve
Inside the safety cockpit mis. Mm. 900 x 1450 with hot-galvanised upper part and 2.5mm thick bossed aluminium lid.

External Coating

The MC. 10 and 12.5 LPG tanks can be buried directly without formwork. They are coated with a two-component, epoxy-polyamine paint that has a very high dry residue that is applied hot. After careful sandblasting to almost white metal SA 2.5, we apply a final film of thickness that is no less than 500 microns. This is all according to UNI EN ISO 8503, and it is then equipped with an adequate cathodic protection system.

Cathodic Protection

The cathodic protection system grounds the tanks. The system is designed in such a way as to achieve maximum efficiency and durability, so that the system operates regularly during the entire life expectancy period for Mg anodes. Normally the expected period is about 20 years, and after this period you should only need to replace the anodes.

Elements of cathodic protection:

No. 04 magnesium anodes from Kg. 6
Reference electrode

Optional Accessories for
Taxed Plant

No. 01 Level indicator type LM1 for tank of MC 10 / 12.5 underground horizontal, diameter 1700mm x 200mm. PN40 DN65
Dial diameter mm. 150 with double scale, both centimetre and percentage
No. 01 Metric rod DN 25 PN 40 stainless steel probe
No. 01 Antistatic flat-body ball valve and firesafe dn: 25 PN 40 ASTM A 350 LF2
No. 01 Thermometer DN 100 Att. axial -30° + 70°C DN15 PN10 / 40, complete with valve, imm. Sottofl. - bulb = 1700, without thermometric pocket x underground tank
Assembly of the same to the tank
No. 01 Certification 'SIT'